Tools

Repair essentials for the home mechanic. Kit includes: - BBe-1 External Bottom Bracket - CCI-1 Crank Cap Bolt Install/Removal Tool - CW-1 Chain Whip - PDL-1 Pedal Wrench - TRL-3 Tire Levers (x3) - CAT-2 Crank Arm Remover Tool - CNT-3 Chain Tool - ST-1 Spoke Wrench - CLT-2 Cassette Lockring Tool - TA-1 8mm Hex / 1/2-inch Ratchet Adapter - HW-8 8mm Hex Wrench - TW-1 T25 Torx Wrench - HWS-2 Hex Wrench Set (2, 2.5, 3, 4, 5, 6mm) - PK-1 Inner Tube Patch Kit

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.

Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless forks. Slide on the guide, clamp it down and the hardened-steel cutting slot ensures a perfect cut every time. You can remove as little as 1mm, too.

- Essential accessories needed for flat repairs and minor adjustments - Weather safe, durable 1.5L saddle bag - Dual head (Presta/Schrader) mini pump - High strength ABS plastic tire levers (x2) - MLT-6 Multi-Tool (3, 4, 5, 6mm Hex, Phillips and Flat screw drivers - Vulcanized glue tube repair patches

Serfas has the basics covered with the Combo Kit. It comes with their Micro Blast CO2 inflator, 2 16-gram threaded cartridges, a 6-piece mini-tool, and a set of tire levers, as well as a seat bag to carry it all.

A CO2 inflator and full-featured mini tool in one! Serfas' ST-17i features 2, 4, 5, 6 and 8mm Allen keys. It also has Phillips and flathead screwdrivers, T25 and T30 Torx wrenches, and 3.23, 3.3, 3.45, 3.96mm spoke wrenches. In addition, it boasts a 10mm open end wrench, a chain breaker and a CO2 inflator head (cartridges sold separately). With all that, this small tool's capabilities are hardly mini.

Take the guesswork out of installing cables, wires and housing inside the frame. The IR-1.2 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames. Kit includes four plastic-coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation. Newly updated to include a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole. Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits. Works with any size frame including tandems. A true time and frustration saver!

- Shop-quality bottom bracket tool for damage-free installation and removal of Origin8 Revolvr 12-notch x 36mm BB cups - Center post helps to fix and stabilize the tool in to the BB cup - 1/2" drive is compatible with ratchet and torque wrenches - Required for Parts #211565 and #211566 - Compatibility: Shimano HTII 24mm and SRAM GXP 22/24mm - Size: 12-Notch x 36mm - Brand Compatibility: Origin8 BB90/95

Park's Professional Pedal Wrench features an angled, oversize head for maximum leverage. It has two 15mm wrenches at different angles, so you can maximize your leverage, and a long, round, vinyl-coated handle that won’t dig into your hand the way flat wrenches do. There's even a hole in the end for hanging the wrench on your toolboard.

Finish Line's Shop Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.

- Featuring all five Muc-Off brushes in a handy storage bag - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels - Wheel and component brush ideal to clean rim and spokes with ease - Two-prong brush ideal to reach hard-to-shift dirt on your components

This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing, with a molded handle for comfort. - 1/8-inch model works on 1/8-inch chains and sprockets - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools - Features hardened pins to keep the chain in place

The Park Tool FWS-2 Fold-Up Wrench Set combines all the popular hex and Torx compatible wrench sizes of the AWS-10 and TWS-2 into one convenient set. The multi-position shop grade fold-ups are comfortable, lightweight, slip-resistant, and 40% stronger than steel handles. Made in USA.

Serfas' Slimline mini-tool has everything you need for road and trail fixes in an incredibly compact package. It includes: 2, 2.5, 3, 4, 5, and 6mm Allen keys, a T25 Torx wrench, a spoke wrench and a chain tool. This compact, functional tool also tucks away Phillips and flathead screwdrivers between it's thin chrome body.

- Works with all multi-speed bikes (including 12-speed) as well as some single-speed models and e-bikes - Cleans chain without the need to remove the chain - 3 brush heads power away dirt and grime - Absorbent sponge soaks up the degreaser as the chain exits the scrubber - Heavy duty plastic construction ensures years of performance - Sturdy handle and one-piece lid clamp make this chain scrubber easy to use

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.

Serfas' Mini-Tool has the basics you need to get home. This mini-tool sports 2, 2.5, 3, 4, 5, 6 and 8mm Allen wrenches, a T25 Torx wrench, a chain tool and Phillips and flathead screwdrivers. The tool surfaces are chrome-plated for durability and the small size lets you take it everywhere.

- Muc-Off's 3 most popular brushes in an handy pack - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels

The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?

Use Sunlite's Shimano/ISIS BB Tool to remove Shimano and ISIS Drive splined 20-tooth bottom bracket cups. This tool uses wrench flats.

- For clean cutting of bicycle cables and housings - Spring loaded for ease of use - Built-in pick for opening housing liner

Sunlite's 30-32/36-40 Headset Wrench is a double-ended wrench that fits threaded headsets. Having 4 tools in one is really convenient!

Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

- 2 tools in one: Chain Whip/Pedal Wrench - Sprocket remover chain whip with built in lockring spanner - Rubber-coated non-slip handle

- For removal of cassette-type rear wheel gears - Must be used with compatible cassette lockring tool - Comfortable rubber coated handle improves grip - Fits up to 9sp cassette

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

The TL-6.2 is a composite covered, steel core tire lever that provides smooth, scratch-free operation and superior strength to help remove even the tightest tires. Newly upgraded with a tougher, more slippery material and a protruding steel tip to more easily and securely engage the tire bead. A perfect size (5"/12.7cm) to either take-along, or use as an everyday shop lever. Set of two.