Other

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- 7075 alloy construction with Cr-Mo bolt - Allows threadless stem use on threaded fork - Designed to work with 1-1/8" threadless stems - Converts a 1" threaded fork to 1-1/8" threadless - Provides 1" of additional height extension

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

- Replacement front cable hanger - Aluminum construction

Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Personalize and protect your bike with Thru-Axle Caps! Designed to look great and protect your bike thru-axle from bumps and scrapes. These new end caps are machined from 6061 aluminum and come in seven color options to show off your personal style! Sold in sets of 2 and press directly into both ends of Wheels Mfg thru-axles adding just the right amount of bling on both sides of your bike. Tech Specs: 6061- aluminum Caps press directly into the ends of Wheels Mfg thru-axles and are held securely in place with a rubber o-ring interface. Made in the USA Sold in sets of 2 end caps

Lockring for CenterLock disc brake rotors

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications

Large surface area triathlon or TT aerobar armrest elbow pad with contoured edges to provide support and relieve pressure points. - F-35 Standard replacement pads are 16mm thick, built with moderate thickness to provide comfort in both training and race conditions - Made of EVA foam with anti-bacterial/anti-microbial Lycra cover - Compatible with F-35a Aluminum, F-35c Carbon, F-35i Injected, and F-35 Adjustable Armrests - Weight: 26g/pair

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

• Fits 3/8" Axles • Lightweight, compact design • Forged aluminum construction • Chromoly bolt

- DT Swiss cartridge bearings - Sold in pairs

- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex

Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro backing.

- Alloy construction - Great for Cruiser or BMX bar conversions

• Aluminum clamp with a chromoly bolt

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

• Aluminum clamp • Built-in rear rack mount

SRAM Cable Barrel Adjusters

- AL6061-T6 alloy quick-release seatpost clamp - Stainless steel bushing ensures smooth lever action - Adjustment knob allows for on-the-fly fine-tuning - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seatpost and steel frame - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 5mm spacers

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

- Type: Headset bearing - Discipline: Road, MTB - Material: Steel - Weight: 26g - Dimension: 1-1/4-inch - Bearing Type: ACB - Angle: 45° x 45°

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

Allows you to use a 1-1/8th inch stem on a bike with a 1-inch steerer.

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

MTB trigger shifter spare parts for repairs and replacement

- M8 Top Plate Nut

- CNC machined aluminum alloy - Fits 26.8mm (1-1/8-inch) steer tube

- AL6061 alloy construction - Non-keyed design - Jar of 20 spacers

We won't blame you for attention to detail. In fact, Spank's got your back. These headset spacer kits are available in 8 popular colors, and come with 3 rings in incremental sizes, to make your next cockpit set up a thing of ease and beauty. - Material: Alloy - Sizes (mm): 3 / 6 / 12 - Diameter: 1 1/8" (28.6mm) - Finish: Brushed Anodized

• Aluminum • CNC-finished

- Converts CenterLock road hubs to accept 6-bolt rotors - Low-profile design for road disc applications - Compatible with standard Quick Release as well as Thru-Axle road hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Origin-8's Carbon Fiber Headset Spacers are made of lightweight, durable carbon and come in 5mm, 10mm or 20mm thicknesses. You get a bag of five spacers.

- Unidirectional carbon fiber 1-1/8" headset spacers - Sold in bags of 5

Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Add some color to your collar with one of these anodized clamps! - Our 28.6mm clamp will work perfectly with our Original, Classic, and Step-Through Series.

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 135x5mm hubs Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut

Replacement hoods for SRAM hydraulic shifter/brake levers.

Keep your seatpost right where you left it. - Cable actuated remote lever for the Bontrager Line Dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Designed to ergonomically replace the left shifter on 1x drivetrains

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA